Electric Wire Rope Winch for Single Girder / Gantry / Cantilever Cranes

single-girder cranes, bridge cranes, gantry cranes, and cantilever cranes Electric wire rope winch
Product name: CD1 type wire rope electric hoist
Product Category: National Standard Wire Rope Electric Hoist

The components of CD1 electric wire rope hoist are: motor, transmission mechanism, drum and wire rope. According to the different positions of the motor and the reel, it can be roughly divided into four types. It can be installed on a variety of cranes such as single-girder cranes, bridge cranes, gantry cranes, and cantilever cranes. This product is strictly implemented in accordance with the national 3 packs, and the product quality is underwritten by the People's Insurance Company of China (PICC). Please use it with confidence.

Electric hoist brake ring bonding method
Binder selection for electric hoist brake ring

The brake ring on the electric hoist needs to be closely attached to the lower part of the electric hoist to play an auxiliary role in hoisting. The adhesive of the electric hoist needs to use 204 adhesive. Looseness during bonding will affect the situation that the electric hoist cannot be controlled when it is hoisted, and the braking distance will become longer. If a suitable adhesive is not selected, the strength of the paste will be reduced.

Electric hoist bonding process

1: Cleaning

Remove all kinds of oil stains and impurities on the surface of the brake ring, use gauze to roughen the side that needs to be bonded, and use acetone for cleaning at the same time.

2: Glue

Use a scraper to apply glue more than twice. After the inner application is completed, it needs to be dried in a natural environment. The drying time is 15 minutes to 30 minutes. Just print.

3: Fixed

Place it in the corresponding area and fix it with a pressure plate. The fixed plane needs to be kept horizontal, without obvious inclination, and tightly fitted with the electric hoist. Let it cure for 2 hours at a high temperature of 180 degrees.

Electric hoist brake ring replacement time

1: It needs to be replaced if it is used continuously for more than half a year.

2: If it is found that the braking distance of the electric hoist becomes longer, the braking effect becomes longer or the normal hoisting cannot be carried out, the brake ring of the electric hoist needs to be replaced.