Henan Dongtai Gear Wheel Co., Ltd.
Henan Dongtai Gear Co., Ltd.
Add to Cart
Stock ZSY315 hard tooth surface reducer
Introduction of ZSY hard tooth surface reducer
ZSY315 reducer weighs about 940kg, center height is 355, center distance is 699, input shaft diameter is 48, output shaft part is 82, keyway is 14, output shaft diameter is 140, output shaft part is 200, keyway is 36, When the speed ratio is 45, the input speed is 1000, the output speed is 22, and the nominal input power of the ZSY315 cylindrical gear reducer is 55KW.
Brief introduction of ZSY reducer: ZSY hard tooth surface reducer mainly includes parallel shaft series and vertical shaft series.
Parallel shaft reducer is produced in accordance with national standards (GB1904-88), with optimized design and advanced international level in the 1980s. It mainly includes four series of ZDY (single-stage), ZLY (two-stage), ZSY (three-stage) and ZFY (four-stage).
The vertical shaft reducer is produced according to the national standard (JB/T9002-1999) for input The transmission device in which the shaft and the output shaft are arranged in a vertical direction, it mainly includes three series of DBY, DCY and DFY.
ZSY hard tooth surface reducer
Types of ZSY hard tooth surface reducer
ZSY315 type reducer includes: ZSY160, ZSY180, ZSY200, ZSY224, ZSY250, ZSY280, ZSY315, ZSY355, ZSY400, ZSY450, ZSY500, ZSY560, ZSY630, ZSY710.
ZSY315 reducer application
range
(2) The peripheral speed of the gear drive is not more than 20 m/s.
(3) Working environment—40～50℃, if it is lower than 0℃, the lubricating oil should be preheated to above 0℃ before starting. This reducer can be used for forward and reverse rotation.
(4) It can be widely used in metallurgy, mining, chemical, building materials, lifting, transportation, textile, paper, instrument, plastic, rubber, engineering machinery, energy and other industrial sectors.
Features of ZSY315 reducer
(1) Main parameters such as center distance and nominal transmission ratio have been optimized and designed, and the main parts and components have good interchangeability.
(2) The gears are all made of high-quality alloy steel after carburizing and quenching. The tooth surface hardness reaches HRC54-62.
(3) Small size, light weight, high precision, large carrying capacity, high efficiency, long life, high reliability, stable transmission and low noise.
(4) Generally, oil pool is used for lubrication and natural cooling. When the thermal power cannot be satisfied, circulating oil lubrication or fan and cooling coil cooling can be used.